Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How to deactivate or activate the ESP on Renault Megane 3

Model: Renault Megane Megane 3, Megane III - Years 2008-2015
Part: Checks and maintenance

In this video tutorial we will see how to activate or deactivate, with a simple move, the ESP, as well as the traction control, on a third series Renault Megane; before seeing how this is done, it is important to specify that traveling with the ESP turned off can be dangerous. We get inside the car and start the engine of our car by pressing the button; then we go to press the button that we find on the left of the steering wheel, next to the controls for adjusting the lights; depending on the warning light we will see that our traction control system has been activated or deactivated!


Posted on 8 January 2024 by ScegliAuto



How to deactivate the alarm on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Let's see in this short and simple guide the instructions that will allow us to deactivate the alarm system of the Renault Megane. First of all, we t
How to permanently disable the Start&Stop system on the Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Today we will see the guide and steps that will allow us to permanently deactivate the automatic start and stop system of the Renault Megane. First o
How to deactivate traction control on Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Let's see in this guide how to disable the advanced traction control of the Renault Megane, by following the instructions below. First of all we get

Other guides that may interest you

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the internal temperature sensor located in the Renault Megane? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos