Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement on Renault Trafic - Opel Vivaro

Model: Renault Trafic MK 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Engine oil

See other generations:
Video tutorial

In this video, follow the instructions to carry out a complete service on a first-generation Renault Trafic and an Opel Vivaro. First, open the bonnet and remove the oil filler cap to allow the oil to drain faster.

Next, lift the vehicle and remove the engine cover by unscrewing all the fixing screws. Now, unscrew the oil drain bolt and let the oil flow into a container.

Replace the oil filter located right next to it by unscrewing it with the appropriate tool and fit a new one. Finally, add the new oil and fill it to the correct level!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

Replacing the Clutch Pump on a Renault Trafic - Opel Vivaro
Replacing the Clutch Pump on a Renault Trafic - Opel Vivaro
Renault Trafic (2001-2014 / MK 2) .. clutch pump on a Renault Trafic, as well as on an Opel Vivaro. First, get inside the vehicle and locate the clutch pump, which is found behind the clutch.. …
Replacing the Dipped Beam Bulb on a Renault Trafic - Opel Vivaro
Replacing the Dipped Beam Bulb on a Renault Trafic - Opel Vivaro
Renault Trafic (2001-2014 / MK 2) .. headlight of a Renault Trafic, but also on an Opel Vivaro. First, open and lift the bonnet of the vehicle; then remove the rubber protective cap for.. …
Battery Replacement for Renault Trafic, Opel Vivaro
Battery Replacement for Renault Trafic, Opel Vivaro
Renault Trafic (2001-2014 / MK 2) .. the battery of a Renault Trafic and also an Opel Vivaro. First, access the battery compartment and use a spanner to disconnect the battery terminals.. …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos