Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : Disassembly of the constant velocity joint and drive shaft Renault Clio 2

Renault Clio - Video tutorial

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Drive shaft
Operation: Disassembly of the constant velocity joint and drive shaft Renault Clio 2

Today we will see, in this video tutorial, how to remove the drive shaft and the constant velocity joint of a second series Renault Clio. First we lift the car going to disassemble the front wheel, unscrewing its bolts: then we go to remove the screws of the brake caliper, in order to remove the caliper itself and the pads. Now we disconnect the braking system from our arm and we go to remove the brake disc, so that we can then remove the hub and be able to remove our drive shaft. We just have to follow the video to the end for the correct reassembly of all the pieces!


Posted on 13 January 2024 by ScegliAuto



Joint replacement on Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Replacing the damaged joint on a Renault Clio? Let's see how it disassembles. We lift the car with a jack to a comfortable height to intervene, unscr
How to remove the wheel bearing on Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) How to intervene on the disassembly of a wheel bearing with all the attached parts on Renault Clio. We place our car on a column bridge, loosen the p
Replacement of the air filter of the Renault Clio 5
Renault Clio (2019-2024 / Clio V, Clio 5) In this video we see how, in order to ensure a constant and clean airflow to the engine's fuel system, according to the maintenance schedule of the R

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos