Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Bumper of a Clio III

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Front bumper

Is the front bumper of your Renault Clio damaged? Follow these steps to remove the front bumper pieces. Lift the front bonnet and locate the screws securing the bumper. Raise the car on a jack; using a plastic or metal lever, remove the securing rivets located at the top of the bumper. Once the rivets (screws) at the top are removed, take out the screws located in the wheel arch liners (remove the pins located at the bottom of the bumper). Remove the bumper from the vehicle body by hand once all securing screws are removed. Disconnect the electrical connectors of the fog lights if fitted on your car model.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Want to remove the front bumper on a Renault Clio? Let's see how to proceed with the disassembly in the video: open the bonnet by pulling the bonnet …
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this guide, you will learn how to remove the badge or emblem of the manufacturer from the Renault Clio fourth series in simple steps. First, open …
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video tutorial, you will learn how to remove the front bumper of a third-generation Renault Clio. First, remove the wheel arch liners by unsc…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos