Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on the Renault Clio?

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Timing belt

To replace the timing belt on the Renault Clio, you need to remove the right front wheel and the corresponding wheel arch liner to access the pulleys located at the bottom of the engine. By moving the tensioner roller, you can remove the poly-V belt and the crankshaft pulley. Then, accessing from the engine bay, after removing some obstructing parts, you will need to secure the pulleys and rotate the tensioner roller to remove the timing belt. After removal, you can insert the new belt and reassemble all the previously removed parts.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the timing belt of the Renault Clio?
How do you replace the timing belt of the Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In order to replace the timing belt of the Renault Clio, you need to lift the car with a jack so that the front right wheel can be removed from its h…
How to replace the timing belt on the Renault Clio 1.2
How to replace the timing belt on the Renault Clio 1.2
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The following steps will illustrate how to dismantle and replace the timing belt on the petrol Renault Clio 1.2. First, raise the vehicle and start b…
How do you replace the timing belt of the Renault Clio 1.5 DCi?
How do you replace the timing belt of the Renault Clio 1.5 DCi?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In order to replace the timing belt of the Renault Clio 1.5 DCi, you need to loosen the screws that secure the front right wheel of the car, so that …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos