Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Oil Filter on a Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Oil filter

See other generations:
Video tutorial

How do you replace the engine oil filter on a Kangoo? Lift the vehicle on a jack and unscrew the bolt from the oil sump; let the fluid drain into a container. Lower the vehicle to the ground, lift the front bonnet, and secure it. Using a socket wrench, unscrew the engine oil filter.

Move the various wiring to access the filter. After removal, extract the worn oil filter and position a new one. Finally, top up with new fluid and close the front bonnet.

Test the engine operation and all related components.


Updated on 23 April 2026 by ScegliAuto


Related tutorials

Replacing the Air Filter on the Renault Kangoo
Replacing the Air Filter on the Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) One of the tasks to perform during the service on the Renault Kangoo is replacing the air filter. Open the engine compartment, remove the breather ho…
Replacing Engine Oil and Oil Filter on a Renault Kangoo 1.2 Petrol
Replacing Engine Oil and Oil Filter on a Renault Kangoo 1.2 Petrol
Renault Kangoo (1997-2008 / KC, MK 1, KW) In this video tutorial, you will learn how to replace the engine oil and oil filter on a Renault Kangoo 1.2 Petrol. First, lift the vehicle and remov…
How to Replace the Engine Oil Filter on a Renault Kangoo?
How to Replace the Engine Oil Filter on a Renault Kangoo?
Renault Kangoo (1997-2008 / KC, MK 1, KW) Before starting, open the front bonnet of your Renault Kangoo. Begin by removing the engine oil dipstick. Once done, put the car in first gear and en…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos