Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Battery of the Renault Clio?

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Key

If the battery of the Renault Clio key runs out, replacing it with a new one is a very simple task. First, the replacement battery must be a 1220 3V. Taking the key, you will notice that it consists of two equal halves that need to be slid in opposite directions to separate them. To do this, grip it with both hands, placing your thumbs on the bottom, right in front of the metal key. Position your index fingers on the top, but on the opposite half, and apply pressure by pushing upwards with your thumbs until the two halves separate. Once the battery is replaced, reunite the halves by following the reverse procedure, ensuring it is completely closed.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (1998-2005 / Clio 2, MK 2) Start by prising open the rear side of the key fob for your Renault Clio. Next, using a flathead screwdriver, lever out and remove the key battery. T…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In the following guide, we will help you complete the replacement of the battery in your Renault Clio Mk4 safely and quickly. First of all, make sure…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) As shown in this tutorial, replacing the remote battery of the Renault Clio is an extremely simple and quick operation. You will need a small flathea…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos