Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the low beam on Renault Clio 2

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Headlight bulb

On our other tutorials we show you the replacement of bulbs on Renault Clio 3 and 4, here we show you a Renault Clio 2. Working with the engine off and with the handbrake on, lift the hood and put the support rod. The video shows you how to replace all the headlight bulbs: for example, if you need to replace the low beam, disconnect the rear connector, that is, facing the engine compartment, simply by pulling it. Then lift the metal catch and remove the bulb. Insert the new one and recompose the area of the bulb itself. Good job!

Posted on 17 October 2021 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses on the Renault Clio 4?
Where are the fuses on the Renault Clio 4?
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) The fuses of the Renault Clio 4 are all contained within the single fuse box installed on the vehicle: in this car model it is possible to identify t…
Replacing the low beam on Renault Clio 3
Replacing the low beam on Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) When working with the engine off and the handbrake on, open the bonnet and fit the special support rod. At this point you can, very simply, remove th…
Where are the fuses of the Renault Clio 4 located?
Where are the fuses of the Renault Clio 4 located?
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) All the fuse boxes of the Renault Clio 4 are used to contain the fuses that regulate the operation of the devices present on the vehicle: in this cat…

Other guides you may be interested in

How to Replace the Timing Belt on a Volkswagen Golf

To perform this simple operation, first lift the bonnet. Then, remove the upper engine cover and the plastic side cover that protects the timing belt. To create more space for the job, you can remove components next to the engine, such as the coolant reservoir, the windscreen washer pipe, and the fuel filter. This will allow you to remove the lower engine cover and the right wheel for better access to the area where you will be working. Now, relieve the tension from the tensioner pulley and remove the belt for replacement.

Watch the video!


by ScegliAuto

More videos