Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to locate and replace the Renault Megane Mk4 diesel filter

Model: Renault Megane Megane IV, Megane 4 - Years 2015-2023
Part: Diesel fuel filter

The guide shows how to locate and replace the Renault Megane Mk4 diesel filter. The position of this filter is located in the front part of the left rear wheel. In order to carry out the replacement it is necessary to lift the vehicle and remove the plastic protection using the two 24 mm bolts and the 10 mm bolt. The diesel filter can then be unscrewed and the fuel drained into a suitable container. Replace the old filter element with a new filter and screw it back into place. Reassemble the protective cover and the relative bolts and lower the vehicle. Turn on the medium a few times to fill the filter.

Posted on 5 April 2022 by ScegliAuto

Video tutorial

Related tutorials

When to change the diesel filter on Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Replacing the diesel filter on a Renault Megane? Let's see how it disassembles. We lift the car onto a column bridge, remove the protective panel. We…
How do you replace the Renault Megane diesel filter?
How do you replace the Renault Megane diesel filter?
Renault Megane (2002-2010 / Megane 2) In order to replace the Renault Megane diesel filter, you have to lift the car and place a tray for collecting fluids under it. Subsequently, it will…
How to replace the fuel filter of the Renault Megane
How to replace the fuel filter of the Renault Megane
Renault Megane (2008-2015 / Megane 3, Megane III) Below we will see the steps that will allow us to disassemble and replace the fuel filter of the Renault Megane. First, we open the hood of the car a…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos