Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Brake Pads

Model: Renault Megane Megane 1 - Years 1995-2003
Part: Brake pads

Once the vehicle is lifted, remove the front wheel to access the brake caliper; disconnect the wear sensor connector and proceed to remove only the lower pin of the brake caliper so that it can be lifted upwards to extract the old pads; clean the pad seats, connect the new wear sensor, fit the new pads, retract the caliper piston with a clamp, and refit the caliper. Repeat the same procedure on the other wheel and pump the brake pedal until it offers the correct resistance, paying attention during the initial braking.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Front Brake Pads
Replacement of Front Brake Pads
Renault Megane (1995-2003 / Megane 1) Lift the vehicle on a hydraulic lift and remove the front wheels; lever between the pads and caliper to retract the piston and facilitate removal; un…
How to Change the Front Brake Pads on a Renault Megane
How to Change the Front Brake Pads on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) On the Renault Megane, the procedure begins with securing the car: work on the front wheel, which is removed to access the brake assembly. With the c…
How to Change the Front Brake Pads on the Renault Megane II
How to Change the Front Brake Pads on the Renault Megane II
Renault Megane (2002-2010 / Megane 2) Here’s how to easily change the brake pads on the Renault Megane II: start by opening the brake fluid reservoir cap. You will need to remove the fron…

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos