Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Turn Off the Anti-Fog Warning Light

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Warning light – error code

See other generations:
Video tutorial

Taking the specified vehicle model as an example, if the warning light comes on, proceed as follows: Turn the ignition on and off two or three times, then leave the key in the 'on' position. At this point, using pliers, remove the fuse for the mentioned filter from the fuse box located on the left side of the steering wheel and reinsert it. When you start the vehicle, you will notice that the warning light and error message previously displayed will no longer be visible on the display.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How do you reset the AdBlue warning light on the Renault Master?
How do you reset the AdBlue warning light on the Renault Master?
Renault Master (2010-2023 / MK 3) The reset of the AdBlue warning light that appears on the instrument panel of the Renault Master is carried out by first topping up the additional fl…
How to reset the AdBlue warning light on the Renault Master?
How to reset the AdBlue warning light on the Renault Master?
Renault Master (2010-2023 / MK 3) To reset the AdBlue warning light on the Renault Master, first top up the additive fluid to ensure the dedicated tank is full. After the top-up is co…
How to Reset the AdBlue Warning Light on the Renault Master
How to Reset the AdBlue Warning Light on the Renault Master
Renault Master (2010-2023 / MK 3) If you see a strange warning related to AdBlue when you turn on the ignition, don’t worry as it’s nothing serious. Everything can be resolved in a fe…

Other guides you may be interested in

    Frequently Asked Questions

    • Master 2010-2023 - How to reset the "service" of a Renault Master? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos