Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Positioning the Vehicle on Axle Stands

Model: Renault Modus MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

Video tutorial

Before lifting the vehicle, ensure that the axle stands provided are suitable for the weight of the vehicle: there is usually a label indicating the maximum load capacity. Once you are certain that the axle stands can support the weight, lift the vehicle with a jack, positioning it under a reinforcement rib beneath the sill; always position the stand under a rib, adjust its height, lock it in this position, and lower the jack so that the car rests on the axle stand.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing Front Driveshaft
Instructions for Removing Front Driveshaft
Renault Modus (2004-2013 / MK 1) To replace the front driveshaft, lift the vehicle (on a ramp or suitable car stands), remove the front wheel, the tie rod end from the steering rack,…
Instructions for Replacing Gearbox Oil
Instructions for Replacing Gearbox Oil
Renault Modus (2004-2013 / MK 1) Lift the vehicle on suitable car stands to facilitate access to the gearbox. Position a container directly under the gearbox and unscrew the drain pl…
Instructions for Removing the Right Driveshaft
Instructions for Removing the Right Driveshaft
Renault Modus (2004-2013 / MK 1) Lift the vehicle on suitable axle stands, remove the front wheel and the nut securing the driveshaft at the centre of the hub: it may be advisable to…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos