|
Do it yourself
| |||
| ||||
Filter Replacement Instructions
Model: Renault Clio
Clio 2, MK 2
- Years 1998-2005
Replace all filters during each service: start with the engine air filter located at the top of the engine, just beneath the plastic cover; once the cover is removed, disconnect the air intake duct from the filter housing and unscrew the screws holding the two components of the filter together, open the housing and remove the old filter, clean any dirt residue and insert the new filter by tightening the screws. Next, move to the cabin air filter located just below the windscreen on the passenger side: remove the seal, then take off the plastic cover, unscrew the fixing screws of the cap and extract the old filter; insert the new one ensuring the airflow direction is correct. Complete with the replacement of the diesel filter located just in front of the battery; first, drain the filter by unscrewing the drain screw underneath; then disconnect the hoses by pressing on the locking tabs and pull the filter upwards; position the new filter, connect the hoses and fill it by pumping the manual pump before starting the engine.
Updated on 13 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Clio
(1998-2005 /
Clio 2, MK 2)
Position the vehicle on suitable car stands and remove the rear wheel; apply a jack under the suspension to support it during the removal of the shoc…
Renault Clio
(1998-2005 /
Clio 2, MK 2)
The diesel filter is located near the shock absorber and resembles a small bucket to which the supply, return, and recovery pipes are attached; first…
Renault Clio
(2012-2019 /
Clio IV, MK 4, Clio 4)
Routine maintenance is equivalent to a service or inspection. This task involves changing the engine oil and the oil, air, and pollen filters. Start …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Reset the Central Locking of the Volkswagen Golf 4?
If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.170
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |