Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Scenic
  6. : How to replace the air filter on the Renault Scenic

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Air filter
Operation: How to replace the air filter on the Renault Scenic

Compared to what happens in other car models belonging to the same category, in the case of the Renault Scenic the replacement of the air filter is slightly more complex and less rapid. In fact, before being able to access the box containing the filter, it is necessary to remove all the various rubber and plastic protections that cover the engine compartment. Once this is done, locate the filter box located at the top right and unscrew the various screws that hold it in place. Finally, remove it completely and replace the old filter inside it with a perfectly compatible new one. At this point you just have to reassemble the entire box and obviously also the various components that form the cover of the engine compartment.


Posted on 16 September 2022 by ScegliAuto



How to replace the air filter of the Renault Scenic 2
Renault Scenic (2003-2009 / MK 2, Scenic 2) In the following guide dedicated to all of you who own a Renault Scenic Mk2, we will discover the steps you need to take to correctly replace the eng
How to replace the air filter on the Renault Scenic
Renault Scenic (1993-2003 / MK 1, RX4, Scenic 1) If you want to replace the air filter on your Renault Scenic yourself but you don't know how to do it, then read the following mini guide carefully a
Renault Scenic air filter replacement
Renault Scenic (2003-2009 / MK 2, Scenic 2) How do you replace the air filter on a Renault Scenic? Let's see how to remove the car air filter from inside the engine compartment. We open the eng

    Frequently Asked Questions

    • Scenic 2009-2015 - Where is the Renault Scenic 3 engine air filter located? Read Answer
    • Scenic 2003-2009 - Where is the Renault Scenic II engine air filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos