Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Adblue Electronic Control Unit on the Renault Master?

Model: Renault Master MK 3 - Years 2010-2023
Part: AdBlue warning light

In this video tutorial, you can see where the Adblue electronic control unit is located on the Renault Master through a few simple steps that will guide you towards proper vehicle management. The diagnostic tool cannot access the Adblue electronic control unit. First, lift the bonnet of your car and secure it with the appropriate prop, ensuring everything is in order. Then, open the driver's side door; where the accelerator pedals are, there is a cover that needs to be removed, and if you look closely inside, you will see the Adblue control unit.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the AdBlue system control unit located in the Renault Master van?
Where is the AdBlue system control unit located in the Renault Master van?
Renault Master (2010-2023 / MK 3) In this video we can see where the AdBlue system control unit is located in the Renault Master van, useful in case we need to replace it due to a mal…
How to check the AdBlue fluid level of the Renault Master
How to check the AdBlue fluid level of the Renault Master
Renault Master (2010-2023 / MK 3) Today we discover the instructions that allow us to check the level of AdBlue liquid in the Renault Master, as well as in the Trafic, in simple and q…
Resetting the AdBlue Warning Light on the Renault Master
Resetting the AdBlue Warning Light on the Renault Master
Renault Master (2010-2023 / MK 3) In this video tutorial, you will learn how to reset the AdBlue warning light on the Renault Master. First, top up the AdBlue tank by unscrewing the c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos