Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Airbag on the Renault Clio?

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Airbag

In this tutorial, you can see how to remove the airbag on the Renault Clio 3, a very simple and quick operation. Before proceeding, it is important to disconnect the negative battery terminal to avoid accidental activations that can be very dangerous. Start by grasping the airbag from the designated slot on the left side, then pull it towards you and slightly disengage it from the steering wheel. Next, insert a long screwdriver into the lower hole and push it all the way in to unlock the internal latch. At this point, you can fully extract it and disconnect the rear connector.

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Airbag on a Renault Clio
How to Remove the Airbag on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) How to remove the airbag from a Renault Clio? Follow this guide. Before removing the airbag in the vehicle, disconnect the battery power cables. Unsc…
How to Remove the Steering Wheel Airbag on a Renault Clio
How to Remove the Steering Wheel Airbag on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) This guide shows how to remove the steering wheel airbag on a Renault Clio. Before removing the steering wheel, disconnect the car's power terminals.…
How to disassemble the steering wheel airbag in the Renault Clio?
How to disassemble the steering wheel airbag in the Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this tutorial, we can see how to remove the steering wheel airbag in the Renault Clio, an extremely simple and quick operation. Before proceeding,…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos