|
Do it yourself
| |||
| ||||
How to Reset the Service Light on a Renault Clio III
Model: Renault Clio
MK 3, Clio 3, Clio III
- Years 2005-2013
When your Renault Clio asks you to perform a service, meaning to change the oil and filters, do not underestimate this request; you must comply as it is for your safety and that of others. Once you have completed the service, and only then, you can reset the light, and it is a very simple operation: get into the vehicle and close all four doors, then turn the key to position 1. You will operate with the control on the right side of the steering wheel. Scroll through the menu using the "up" button until you reach the service option. Now hold down the "down" button until the message starts to flash. At this point, you can release the button, and the menu will indicate that there are no services due. To turn off the spanner light, now hold down the "up" button until the next service interval appears on the screen, and the spanner light will go out. You can now turn off the ignition and then turn it back on to ensure everything is in order.
Updated on 10 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
Before you begin, sit in the driver's seat of your Renault Clio. Start by turning on the ignition by turning the key in the ignition barrel. Next, wa…
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
To reset the service light on a Renault Clio MK III, first, get into the vehicle, close all four doors, and turn the key to position 1, powering on t…
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
To reset the service light on the Renault Clio 2006, use the two side buttons up and down on the right-hand lever of the steering wheel, the lever be…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.623
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |