Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Kit on a Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Clutch

See other generations:
Video tutorial

To replace the clutch kit on this vehicle, refer to the instructions below, although this task is quite complex for DIY. This guide assumes the engine has already been removed and you have purchased a kit with the clutch disc, pressure plate, and release bearing.

First, remove the bolts securing the pressure plate to the flywheel, then proceed to remove the flywheel by taking out the bolts.

Next, extract the oil seal to replace it with the new one. Reposition the flywheel, reattach the bolts, and tighten them with a torque wrench. Now, install the clutch disc and corresponding pressure plate, inserting the centring pin included in the replacement kit. Finally, tighten the fixing bolts of the clutch assembly.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Clutch on the Renault Clio 1.5 dCi
Guide to Replacing the Clutch on the Renault Clio 1.5 dCi
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Today’s main instructions will show you how to remove and replace the clutch on the Renault Clio 1.5 dCi. First, raise the vehicle and start by remov…
How to replace the clutch on a Renault Clio?
How to replace the clutch on a Renault Clio?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace the clutch on a Renault Clio, lift the front of the car so you can remove the two front wheels; their removal will allow you to loosen the…
How do you replace the clutch of the Renault Clio?
How do you replace the clutch of the Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To ensure that the clutch replacement on the Renault Clio takes place, it will be necessary to lift the car so that the front wheels are not in conta…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos