Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Scenic
  6. : Engine air filter replacement

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Air filter
Operation: Engine air filter replacement

Open the front hood and intercept the seat of the engine air filter container: it is located in the front right part of the engine compartment (looking from the front), immediately in front of the coolant reservoir; therefore unscrew the four fixing screws of the cover so as to be able to remove it and extract the old filter, remove any residual dirt and insert the new filter and then reassemble the cover, taking care to make the gasket adhere perfectly. The clean filter will allow the engine to take in the right amount of air and make the most of both in terms of performance and consumption.


Posted on 24 August 2023 by ScegliAuto



Car engine air filter replacement
Renault Scenic (1996-2003 / ) The air filter is used to filter the air that enters the combustion chamber from the outside. If this filter does not work well, external agents can
Engine air filter replacement
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) The air filter is a component of the fuel system of our car and is used to filter and therefore clean the air that is channeled from the outside and
Renault Scenic air filter replacement
Renault Scenic (2003-2009 / MK 2, Scenic 2) How do you replace the air filter on a Renault Scenic? Let's see how to remove the car air filter from inside the engine compartment. We open the eng

    Frequently Asked Questions

    • Scenic 2009-2015 - Where is the Renault Scenic 3 engine air filter located? Read Answer
    • Scenic 2003-2009 - Where is the Renault Scenic II engine air filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos