|
Do it yourself
| |||
| ||||
How to Change the Oil and Oil Filter on the Renault Captur
Model: Renault Captur
MK 1
- Years:
2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
To change the oil and oil filter on the Renault Captur, start by turning off the car, pulling the handbrake, and unscrewing the oil filler cap (in the video, a pre-oil change cleaner is poured; leave the car running for 5 minutes, pour the product, and let the engine idle for 10-15 minutes before turning it off); now lift the front of the car, if present, remove the plastic undertray to access the oil sump bolt, unscrew the bolt with a suitable spanner, let the oil drain into a container for 10 minutes, and clean the oil drain plug before refitting it (also replace the plastic undertray). Now, go to the top of the engine, disconnect the air intake hose by inserting a screwdriver into the gap on the front grille to remove it, detach the hose from the oil filter, unscrew the oil filter (a socket spanner is used in the video), and let the oil drain into a container; take the new filter, lubricate the seal with new oil, screw the filter back on, reposition the hose, and reconnect the air intake hose. Now lower the car, insert a funnel into the oil filler hole, pour in about 90% of the required oil, close the oil filler cap, start the engine for 30 seconds, remove the oil dipstick, clean it, reinsert it, pull it out again, and check the oil level; if necessary, bring the oil level close to the "max" without exceeding it, finally reinsert the dipstick and close the operation is complete.
Updated on 20 July 2026 by ScegliAuto
Related tutorials
Renault Captur
(2013-2019 /
MK 1)
This guide will provide useful instructions for performing the routine maintenance service, replacing the engine oil and oil filter of the Renault Ca…
Renault Captur
(2013-2019 /
MK 1)
Today we will explain how to replace the engine oil and oil filter on a Renault Captur 1 vehicle. To perform the engine oil replacement, we need to o…
Renault Captur
(2013-2019 /
MK 1)
If you intend to change the engine oil and filter on this vehicle yourself, the steps and procedure to follow for a correct replacement are detailed …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Change the Key Fob Battery for an Audi Q8?
To change the key fob battery for an Audi Q8, start by locating the release button on the key. Press this button to extract the emergency mechanical key. With the mechanical key removed, find the visible slot in the key body. Use a small flathead screwdriver or a plastic tool to gently pry open the key fob shell. Once the shell is open, you will find the battery, usually a CR2032. Note the orientation of the battery before removing it. Remove the old battery and insert the new one, ensuring the positive (+) side is oriented correctly. Reassemble the key fob shell, making sure all pieces fit together snugly. Finally, reinsert the mechanical key into its housing. Your key should now function properly with the new battery. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |