Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Brake Pads on a Renault Clio III

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, learn how to change the rear brake pads on a Renault Clio III: open the bonnet and the brake fluid reservoir. You will need to lift the vehicle using two axle stands and remove the rear wheels for easy access.

Unlock the brake caliper and remove the bolts from the bracket, allowing the caliper to be free; secure it to the shock absorbers to prevent damage to the flexible hose. Now you can remove the worn pads, clean the bracket with a wire brush, push the piston back, and take the new pads, applying copper grease to the outer side; refit the caliper and then the bolts of the bracket (using the new bolt).

Repeat on the other side. Refit the wheels and lower the vehicle.

Remember to close the brake fluid reservoir cap. Before using the car, press the brake pedal firmly to bring the pads close to the disc.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace the front brake pads on a Renault Clio III, start by purchasing Brembo pads on eBay with code 272825496362 for £27.45. Open the cap of the…
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this guide, we will see the main instructions that will allow us to disassemble and remove the rear seats of the Renault Clio, in simple steps. Fi…
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this video, you will see step-by-step instructions for removing and replacing the front brake pads on the fourth generation Renault Clio. First, l…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos