Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Renault 19?

Model: Renault 19 MK 1 - Years 1988-1997
Part: Fuse box

On the Renault 19, all fuses are contained within the appropriate fuse boxes that are installed on the vehicle: in this car model, it is possible to identify a single box that contains the fuses. This is located in the dashboard area immediately below the glove compartment on the passenger side: inside this box, it will be possible to identify the fuses that are responsible for the operation of the courtesy lights, fuel pump, audible warning, etc. Each fuse can be replaced with a new replacement piece.

Posted on 11 June 2023 by ScegliAuto

Video tutorial

Related tutorials

Where is and how to reach the fuse box of a Renault 19?
Where is and how to reach the fuse box of a Renault 19?
Renault 19 (1988-1997 / MK 1) The fuse box of a Renault 19 is located in the glove compartment on the front passenger side. To access it, start by opening the glove compartment. I…
How to replace the air filter of the Renault 19.
How to replace the air filter of the Renault 19.
Renault 19 (1988-1997 / MK 1) Replacing the air filter on a Renault 19 is a simple and quick task that can be done independently, as the filter is located under the front hood rig…
How to replace the front brake pads of the Renault 19.
How to replace the front brake pads of the Renault 19.
Renault 19 (1988-1997 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the front brake pads of the Renault 19. First, let's lift the v…

Other guides you may be interested in

How to Replace the Window Regulator on the BMW X3

Replacing the window regulator mechanism requires removing the door panel and the aluminum underpanel to access the mechanism itself. Remove the motor and loosen the glass retaining clips to complete the removal of the window regulator. Attach the motor to the new mechanism and insert the assembled unit back into the door, securing it with the appropriate nuts. Then, insert the glass and tighten the clips, completing the installation by connecting the motor's power connector and performing a functionality check before reassembling all other components.

Watch the video!


by ScegliAuto

More videos