Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open and Replace the Fuel Flap and Cap on the Renault Twingo

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuel cap

See other generations:
Video tutorial

Follow these steps to open and remove the fuel flap and cap on the Renault Twingo. First, unlock the vehicle and open the fuel flap; in this case, the cap has a lock, which you will open with the ignition key, as shown in the video.

At this point, the video will provide the main instructions on how to dismantle and remove the fuel flap, replacing the entire piece with a new one; if it is necessary to remove the fuel cap as well, you will also need to replace the key for opening it!


Updated on 8 August 2026 by ScegliAuto


Related tutorials

How to Open the Bonnet of the Third Generation Renault Twingo
How to Open the Bonnet of the Third Generation Renault Twingo
Renault Twingo (2014-2024 / Twingo III, Twingo 3) In this short video, you will learn how to open the front bonnet of the third generation Renault Twingo. Unlike the classic lever under the driver's …
How to Open the Front Bonnet of the Renault Twingo MK3
How to Open the Front Bonnet of the Renault Twingo MK3
Renault Twingo (2014-2024 / Twingo III, Twingo 3) To top up the fluids in the Renault Twingo, you need to open the front bonnet for access to the filler necks. Stand in front of the vehicle, and on t…
Replacement of the cabin fan resistor of the Renault Twingo
Replacement of the cabin fan resistor of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) In this guide we will see the information related to disassembly and replacement of the cabin fan resistor of the Renault Twingo. First, we get on bo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos