Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Renault Master

Model: Renault Master MK 3 - Years 2010-2023
Part: Warning light – error code

This video shows how to reset the maintenance light on the Renault Master MK3. It is recommended to perform this procedure only after servicing the vehicle. To reset, first start the instrument panel, then using the down arrow button located on the lever to the right of the steering wheel, scroll until you find the service option. Once you locate the service option, press and hold the buttons until the reset is complete, indicated by the light stopping flashing. After the reset, release the buttons and restart the instrument panel to verify that the procedure was successful.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Master (2010-2023 / MK 3) To reset the service light on a Renault Master vehicle, follow these steps: Start the car and ensure the display shows the total mileage. Press and h…
Renault Master (2010-2023 / MK 3) After performing the routine service required by the Renault Master, it is necessary to reset the service light, usually orange and shaped like a spa…
Renault Master (2010-2023 / MK 3) By following these simple steps, we will reset the service light for the regular maintenance of the engine oil change in the Renault Master. First of…

Other guides you may be interested in

    Frequently Asked Questions

    • Master 2010-2023 - Where can I find the unlock code for the Renault Master van's radio? Read answer
    • Master 1997-2010 - Where is the Renault Master 2 radio unlock code? Read answer
    • Master 2010-2023 - How to reset the "service" of a Renault Master? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos