Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Renault Captur

Model: Renault Captur MK 2 - Years 2019-2026
Part: Service warning light

To reset the service light on the Renault Captur, turn on the instrument cluster without starting the engine. Press the button on the right side of the steering wheel with the tab symbol to display "vehicle system". Press the button with the downward arrow until you see "service due in." Hold the button with the "ok" label until the kilometres stop flashing and the new mileage appears. Once the new mileage is displayed, return to the main screen and switch off the instrument cluster. Finally, turn it back on and check that the service light is reset.

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Renault Captur?
How to Reset the Service Light on a Renault Captur?
Renault Captur (2013-2019 / MK 1) To reset the Service light on a Renault Captur, turn on the instrument panel to navigate through the menu: press the button located at the bottom of …
How to Reset the Service Light on the Renault Captur?
How to Reset the Service Light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) From the display of the Renault Captur, you can completely clear the Service light by turning on the instrument panel to access the menu. To do this,…
How to reset the Service light on the Renault Captur?
How to reset the Service light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) In the Renault Captur, to reset the Service light, first turn on the instrument cluster to navigate the menu. Press the button located at the bottom …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos