Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the engine oil of the Renault Megane?

Model: Renault Megane Megane 3, Megane III - Years 2008-2015
Part: Engine oil

In order to replace the engine oil of the Renault Megane, you need to lift the vehicle with a jack or a lift, so that you can have access to the drain plug of the oil pan, located in the lower part of the engine compartment. By loosening this plug, it will be possible to collect all the used oil inside a properly positioned container. Once all the oil has drained out, you can close the drain plug and open the hood: in the front part of the engine block, you will find the oil filter, which should be removed and replaced with a new one. Finally, you can top up the oil by inserting it through the vent located on the top part of the engine block.

Posted on 9 September 2023 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (1995-2003 / Megane 1) Today in this video I will explain how to change the oil and the engine filter on our Renault Megane, it is not a very complex operation, it is enoug…
Renault Megane (2002-2010 / Megane 2) I will show you How to change the oil and the engine filter on our Renault Megane Scenic, it is not a very complex operation, it is enough to have a …
Renault Megane (1995-2003 / Megane 1) Replacing the engine oil on a Renault Megane? Let's see the oil replacement. We lift the car on a pillar or jack bridge, unscrew the pin of the oil p…

Other guides you may be interested in

How to Replace the Fuel Pump on an Opel Corsa C

Usually, upon the first ignition of the dashboard, a sound similar to a spray can be heard from the rear of the cabin: this is the fuel pump pressurising the system and preparing to supply fuel to the engine for ignition; if this sound is not heard, start by checking the integrity of the relevant power fuse, and if it is intact, verify that voltage reaches the power connector; if current is present, you can also try powering the pump directly to confirm it is faulty; replacing it is very simple, just disconnect the connector and hoses, then unclip the retaining ring and remove it to replace it with a new one.

Watch the video!


by ScegliAuto

More videos