Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform a Service Reset on a Renault Trafic 2

Model: Renault Trafic MK 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Warning light – error code

See other generations:
Video tutorial

This useful video guide shows how to perform the service light reset on a second-generation Renault Trafic, produced from 2001 to 2014. To do this, as shown in the video, turn on the vehicle's instrument panel without starting the engine, then press the accelerator pedal four times, holding it down on the fourth press.

This will cause the service light icon to flash on the information display of the speedometer.

Continue to hold the accelerator until the light disappears.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on the Renault Trafic
Resetting the Service Light on the Renault Trafic
Renault Trafic (2014-2026 / MK 3) In a few simple steps, learn how to reset the service light for the regular maintenance oil change on the Renault Trafic, as well as the Opel Vivaro.…
How to Reset the Service and Maintenance Light on a Renault Trafic
How to Reset the Service and Maintenance Light on a Renault Trafic
Renault Trafic (2014-2026 / MK 3) The instructions in this guide will allow you to reset the ordinary maintenance service light on a Renault Trafic. First, get in the vehicle and turn…
How to Reset the Service Light on the Renault Trafic 3?
How to Reset the Service Light on the Renault Trafic 3?
Renault Trafic (2014-2026 / MK 3) If you own a Renault Trafic third series and want to know how to correctly perform the manual reset of the service light, follow the procedure descri…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos