Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Renault Megane?

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

To reset the tyre pressure warning light on the Renault Megane, insert the ignition key into the ignition barrel to turn on the instrument panel: once it is on, repeatedly press the button located on the lever to the right of the steering wheel until the message showing the miles until the next service appears.

Once this message is displayed, press and hold the same button for a few seconds until the interval resets and the light disappears from the instrument panel.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Renault Megane 4
How to Reset the Service Light on the Renault Megane 4
Renault Megane (2015-2023 / Megane IV, Megane 4) The service light, related to the vehicle's service interval, on a Renault Megane Mk4 activates when maintenance is due. You must then reset the ligh…
How to Reset the Service Light on a Renault Megane 4
How to Reset the Service Light on a Renault Megane 4
Renault Megane (2015-2023 / Megane IV, Megane 4) This video aims to help you reset the service light on your Renault Megane 4. Proceed as follows: after turning on the instrument cluster, use the di…
How to Reset the Service Light on the Renault Megane?
How to Reset the Service Light on the Renault Megane?
Renault Megane (2015-2023 / Megane IV, Megane 4) .. This tutorial shows how to reset the service light on the Renault Megane, a simple and quick operation to perform only after.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - How do you reset the Renault Megane Service warning light? Read answer
    • Megane 2015-2023 - How to reset the "Service" light on a Renault Megane? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos