Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Oil on a Renault Master

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Checks and maintenance

See other generations:
Video tutorial

This video shows how to top up the oil when your Renault Master alerts you to do so with the warning light for the reservoir with a drop and the message "maintenance required". First, open the bonnet of your vehicle. Always check the dipstick before topping up to verify the exact oil volume in the tank; this operation should be done when the engine is cold.

The yellow top-up cap is located centrally, making it easy to find. The oil required is SAE 5W30; pour it in and then check the oil level using the dipstick.


Updated on 12 September 2026 by ScegliAuto


Related tutorials

How to replace the engine oil and oil filter of the Renault Master 2.2
How to replace the engine oil and oil filter of the Renault Master 2.2
Renault Master (1997-2010 / MK 2) Today we will see the instructions that will allow us to carry out the ordinary maintenance check, replacing the engine oil and oil filter, of the Re…
Replacement of the engine oil and oil filter of the Renault Master 2.2
Replacement of the engine oil and oil filter of the Renault Master 2.2
Renault Master (1997-2010 / MK 2) Soon we will see the instructions that will allow us to carry out the ordinary maintenance check, replacing the motor oil and oil filter, of the Rena…
How to Service the Renault Master?
How to Service the Renault Master?
Renault Master (2024-2026 / MK 4, XDD) This video shows the sequence of actions needed to complete a service on a Renault Master vehicle. After gathering all necessary materials, position …

    Frequently Asked Questions

    • Master 2010-2023 - What problems does the Renault Master 2.3 dCi have? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos