Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil and oil filter of the Renault Master 2.2

Model: Renault Master MK 2 - Years 1997-2010
Part: Engine oil

Today we will see the instructions that will allow us to carry out the ordinary maintenance check, replacing the engine oil and oil filter, of the Renault Master 2.2. First, lift the vehicle and start unscrewing the drain plug found on the oil pan, using an 8 mm hex key; let the oil drain into a container, then use the appropriate key to remove the oil filter, as shown in the video. At this point, replace the filter cartridge with the new one, screwing the filter by hand; finally, top up with the new engine oil!

Posted on 18 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the engine oil and oil filter of the Renault Master 2.2
Replacement of the engine oil and oil filter of the Renault Master 2.2
Renault Master (1997-2010 / MK 2) Soon we will see the instructions that will allow us to carry out the ordinary maintenance check, replacing the motor oil and oil filter, of the Rena…
How to replace the motor oil and oil filter on the Renault Master
How to replace the motor oil and oil filter on the Renault Master
Renault Master (1997-2010 / MK 2) Today we will explain how to replace the engine oil and oil filter on the Renault Master model 2. To perform the replacement, we must first open the …
How to replace the engine oil and oil filter of the Renault Master
How to replace the engine oil and oil filter of the Renault Master
Renault Master (2010-2023 / MK 3) Today we will explain how to replace the engine oil on a Renault Master vehicle. To perform the oil replacement, we need to open the hood and remove …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos