Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the headlight bulb on a Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

As soon as you notice that the headlight bulb on your Renault Kangoo has blown, you must replace it immediately for your safety. Open the bonnet and position yourself in front of the headlight containing the bulb to be replaced.

On the side facing the engine, you will find the electrical connector, which you will need to remove. Take off the rubber cover that isolates the headlight from external elements, and unclip the retaining spring that holds the bulb in place.

You can then remove the old H4 bulb and insert the new one, taking care not to touch the glass with your bare fingers. Refit the spring, replace the rubber cover, and reconnect the electrical connector.


Updated on 13 September 2026 by ScegliAuto


Related tutorials

How to Remove Headlight Bulbs on Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) Replace the front headlight bulbs on a Renault Kangoo. Open and lift the front bonnet. Using a suitable screwdriver, remove the plastic cover at the …
How to Remove the Third Brake Light and Replace the Bulbs on a Renault Kangoo
How to Remove the Third Brake Light and Replace the Bulbs on a Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) Below are the instructions for removing and replacing the third brake light and its bulbs on a Renault Kangoo. First, open the rear tailgate of the v…
How to Replace the Interior Lighting Bulbs on a Renault Kangoo
How to Replace the Interior Lighting Bulbs on a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) How do you replace the interior lighting bulbs for the manual air conditioning controls on a Renault Kangoo? Follow these steps: Remove the control p…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos