Do it yourself
Frequently asked questions about cars and motorcycles

Wiring Diagrams for the Renault Twingo II

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Checks and maintenance

In this video, you can see the wiring diagrams in English for the Renault Twingo II; this diagram can be purchased on CD from Amazon for £9.00 and requires some electronic knowledge to use. The modules are located under the dashboard on the driver's side. For power, connect the positive and negative directly to the battery terminals. Regarding the engine block, cut the white wire of 2 mm found in the wiring harness under the scuff plate on the driver's side. For the switched positive (+15), connect to the yellow wire at position A7 connected to the locking control unit, located between the bulkhead and the fuse box under the dashboard on the driver's side.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Twingo (2007-2014 / Twingo 2) Below we will see the steps that will allow us to disassemble and replace the standard radio of the Renault Twingo. First, we get into the car and st…
Renault Twingo (2014-2024 / Twingo 3, Twingo III) Through this very useful video guide today, we can see all the fuse box diagrams of a Renault Twingo, third generation model in production from 2014 …
Renault Twingo (2007-2014 / Twingo 2) The instructions in this guide will show you how to replace and install the radio in the Renault Twingo. First, get inside the cabin and start by rem…

Other guides you may be interested in

    Frequently Asked Questions

    • Twingo 1993-2007 - Where is the OBD port on the Renault Twingo located? Read answer
    • Twingo 2014-2024 - What are the problems of the Renault Twingo? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos