Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front fog light bulb of the Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Fog lights

In today's video, we will see the process of disassembling and replacing the front fog light bulbs of the Renault Scenic. First, we lift the car and start unscrewing the fixing screws of the partition found under the engine, in order to remove it; then we disconnect the electrical connector and release the bulb holder, removing the fog light bulb, as shown in the video. At this point, we install the new fog light bulb, of the correct type and with the same attachment; we connect it and reassemble the lower plastic cover!

Posted on 24 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front fog light bulbs of the Renault Scenic
Replacement of the front fog light bulbs of the Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Today we will see the step-by-step instructions that will allow us to disassemble and replace the front fog light bulb of the Renault Scenic. First, …
Replacing the Front Fog Light Bulbs of the Renault Scenic
Replacing the Front Fog Light Bulbs of the Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) This guide will show you how to remove and replace the fog light bulbs in the front headlight of the Renault Scenic. First, move to the front of the …
How to Change the Rear Fog Light Bulb on the Renault Scenic
How to Change the Rear Fog Light Bulb on the Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) In today’s tutorial, we will see how to remove and replace the rear fog light and its bulb on the Renault Scenic. First, move to the back of your car…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos