Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to bleed the thermostat of the cooling liquid of a Renault DCi F9Q engine

Model: Renault Renault Various
Part: Engine

This video is currently unavailable

In this video, you will see how to bleed the thermostat of the cooling liquid of a Renault F9Q DCi engine: the footage shows the return circuit with all its components, including the temperature sensor and the bleed screw, which allows you to drain the system.

Naturally, this operation should not be performed with a hot engine, as you risk burns.

Check for any whitish traces indicating a water leak; micro-leaks are very common in this type of model. The electrical connector can be easily removed by pulling the plastic clip, revealing traces of the liquid passage inside.


Updated on 3 October 2026 by ScegliAuto


Related tutorials

When and How Should I Change the Timing Belt on My Renault with a 1.5 DCI Engine?
Renault Renault Various Following this short video, you will learn how and when to change the timing belt on your Renault with a 1.5 DCI engine, but the same procedure appli…
Is the Renault DCI engine reliable?
Is the Renault DCI engine reliable?
Renault Renault Various The Renault K9K or 1500 DCI engine is a reliable engine with low fuel consumption that is envied by many, and for this reason it is also installed in…
How to remove the connections from the Renault and Dacia 1.5 DCI gearbox
How to remove the connections from the Renault and Dacia 1.5 DCI gearbox
Renault Renault Various In this video we see how to remove the connection cables of the gear shift of various Renault and Dacia cars with the 1.5 DCi engine. They seem to be…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos