Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cruise Control System Operation

Model: Saab 9 5 MK 1, Ys3e - Years 1997-2010
Part: Onboard computer

Cruise control is an electronic system that allows automatic speed regulation of a car. Once the desired speed is selected, it is maintained, depending on the vehicle's conditions. You can also increase or decrease the set speed by pressing two buttons, and if, for example, you decide to overtake another vehicle, pressing the accelerator pedal will increase the speed, which will return to the previously set speed only when you stop accelerating. The system deactivates if the brake, clutch, handbrake is pressed, a safety system (VDC, ASR, etc.) is activated, or if there are electrical circuit failures.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Two Methods to Remove the Car Radio
Saab 9 5 (1997-2010 / MK 1, Ys3e) There are two methods to replace the car radio system: the first involves specific clips, the second a simple screwdriver. The latter method is riski…
Window Lift System Repair
Window Lift System Repair
Saab 9 5 (1997-2010 / MK 1, Ys3e) First, remove the door panel by taking off the seal along the door pillar; then unscrew the panel fixing screws, release the clips, and disconnect th…
Saab 9-5 third stop replacement
Saab 9-5 third stop replacement
Saab 9 5 (1997-2010 / MK 1, Ys3e) How do you remove the third rear light of the Saab? Let's see the disassembly of the headlight placed in the tailgate of the car. We lift the tailgat…

Other guides you may be interested in

How to Replace the Front Headlamp on a Fiat Bravo

First, release the bonnet using the lever, then lift it. To remove the headlamp, you will need to dismantle a significant part of the front bumper. Start by removing the inner wheel arch liner to access the screw that secures the bumper to the wing. Next, remove the screws located on the top of the bumper. This will allow you to unscrew all the bolts securing the headlamp, including the one hidden by the bumper. Finally, disconnect the connector at the back of the headlamp and carry out the necessary replacements.

Watch the video!


by ScegliAuto

More videos