Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Protect the Windscreen with Thin Films

Model: Saab 9 5 MK 1, Ys3e - Years 1997-2010
Part: Windshield

Over time, the windscreen loses its original shine due to abrasion from sand and other agents, while for maximum visibility, it must be perfectly clear. To achieve this, there are special films available that, when applied to the vehicle, help prevent the ageing of the glass. The application of these films requires special equipment, a complete kit of films and solvents specific to the type of vehicle they are to be applied to. After thoroughly cleaning the windscreen, apply the special film to the various parts, then use a tool to remove air bubbles and adhere the film using a heat source.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear bumper on the Saab 9 5
How to replace the rear bumper on the Saab 9 5
Saab 9 5 (1997-2010 / MK 1, Ys3e) This operation is very simple and quick, in fact you just need to follow this short video to understand how to extract the bumper of your car. To unh…
How to Remove the Front Bumper
How to Remove the Front Bumper
Saab 9 5 (1997-2010 / MK 1, Ys3e) This tutorial shows how to remove the front bumper from a Saab 9 5. First, locate the screws to be removed underneath the vehicle and then the screws…
Wiring and Resistor (Regulator) Replacement
Wiring and Resistor (Regulator) Replacement
Saab 9 5 (1997-2010 / MK 1, Ys3e) Open the front bonnet and ensure it is securely supported. Remove the wiper blade and take off the plastic cover located just below the windscreen an…

How to Replace the Oil Pump on the Opel Zafira

You will see the replacement of a crucial part for the car, which requires specific tools to carry out, as it will be necessary to work on the underside of the engine. You should equip yourself with an engine support to hold it upside down. This way, you can remove the bolts that secure the oil sump to take it off. You will then be able to observe the lower part of the conrods along with the oil intake duct, which is directly connected to the oil pump. To remove it, simply unscrew the bolts and extract it.

Watch the video!


by ScegliAuto

More videos