Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the front bumper

Model: Saab 9 5 Ys3e, MK 1 - Years 1997-2010
Part: Front bumper

This tutorial shows how to remove the front bumper from a Saab 9 5. First, the screws to unscrew under the car are shown and, later, the screws that lock the bumper in the upper part of it near the engine hood . The video also explains that the two small front grilles placed next to the headlights must be removed. Numerous anchor points are also present at the side ends of the bumper: you will have to unscrew those as well. A screw to be removed is also present behind the right front headlight so the latter must be extracted. Other anchor points are near the fender. Once you have unscrewed all the points indicated, it will be easy to remove the bumper.


Posted on 23 July 2023 by ScegliAuto



How to replace the rear bumper on the Saab 9 5
Saab 9 5 (1997-2010 / Ys3e, MK 1) This operation is very simple and quick, in fact you just need to follow this short video to understand how to extract the bumper of your car. To unh
Front headlight disassembly instructions
Saab 9 5 (1997-2010 / Ys3e, MK 1) Open the front hood and make sure it is supported safely. Then unhook the front matte from the bumper simply by pulling it forward; in the same way u
Removing the front door panel
Saab 9 5 (1997-2010 / Ys3e, MK 1) This video shows us how to remove the front door panel. First of all we go to remove the screw located just behind the opening lever and then the oth

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos