Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Bumper Removal Instructions

Model: Saab 9 3 MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Front bumper

See other generations:
This video is currently unavailable

Open the front bonnet and ensure it is securely supported. Then detach the plastic clips along the edge of the grille by pressing the central pin inside and extracting the clip.

Next, unscrew the screws along the wheel arch that fix it to the bumper (on both sides of the vehicle) and those along the lower edge. At this point, detach the bumper from the wings by simply pulling it outward, disconnect the fog light connectors, and remove the bumper by pulling it forward.

Optionally, proceed with removing the headlights to replace the bulbs or the respective control units.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

How to Remove the Instrument Cluster of the SAAB 9-3
How to Remove the Instrument Cluster of the SAAB 9-3
Saab 9 3 (1998-2003 / MK 1) Today, we will see the main instructions useful for removing and replacing the instrument cluster of the Saab 9-3. First, get in the vehicle and star…
Replacing the Front Bumper
Replacing the Front Bumper
Saab 9 3 (2002-2014 / MK 2) Open the front bonnet and release the 6 plastic push clips along the edge of the grille (generally, press the centre pin inwards and then pull out th…
How to Replace the Cabin Air Filter on a Saab 9-3
How to Replace the Cabin Air Filter on a Saab 9-3
Saab 9 3 (2002-2014 / MK 2) In this brief guide, we will see step-by-step instructions on how to remove and replace the cabin air filter on a Saab 9-3. First, open the vehicle's…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos