Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 3
    4. : On-board computer recording with resetting of next coupon indication

Saab 9 3 - Video tutorial

Model: Saab 9 3 MK 2 - Years 2002-2014
Part: -board computer
Operation: On-board computer recording with resetting of next coupon indication

Today's cars have computers that facilitate car maintenance by reminding the driver of maintenance operations when the set mileage has been reached. To reset the km traveled indicator on the on-board computer in order to foresee the next maintenance coupon, carry out the following operation. Turn the ignition key to the start position to turn on the control panel. Enter the â € œdrive informationâ € menu and then the â € œserviceâ € menu by turning the appropriate knob. Access the submenu then move the cursor to the appropriate icon and press the central button. Turn the key to the off position and then turn the instrument panel back on and check that the indicator shows 00.


Posted on 19 July 2023 by ScegliAuto



How do you reset the Service light on a Saab 9-3?
Saab 9 3 (2002-2014 / MK 2) The procedure for resetting the Service light on the Saab 9-3 is done by turning on the instrument panel and turning the appropriate key within its i
How to disassemble the instrument panel of the SAAB 9-3
Saab 9 3 (1998-2003 / MK 1) Today we will see the main instructions useful for disassembling and replacing the instrument panel of the Saab 9-3. First of all, we get on board th
Headlight bulb replacement
Saab 9 3 (2002-2014 / MK 2) In the video guide, to describe the operations with greater clarity, the headlight was first completely removed from the car and placed on the counte

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos