Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter on a Saab 9-3 YS3D

Model: Saab 9 3 MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Cabin air filter

See other generations:
Video tutorial

In this video tutorial, you can see how to replace the pollen filter on a Saab 9-3 by following a few simple steps: first, purchase a new pollen filter. Next, get inside the vehicle, switch off the engine, and pull the handbrake.

The filter is located in the top right of the engine bay, under the windscreen. Open the bonnet and secure it with the prop rod. Remove the fastening elements of the ventilation grille.

Take out the filter from its housing and position the new filter, following the arrow indicated on the filter itself.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Pollen Filter on a Saab 9-3
How to Replace the Cabin Pollen Filter on a Saab 9-3
Saab 9 3 (1998-2003 / MK 1) How do you replace the cabin air pollen filter on a Saab 9-3? Follow this guide to perform the removal. Remove the plastic cover under the front wind…
How to Replace the Cabin Air Filter on a Saab 9-3
How to Replace the Cabin Air Filter on a Saab 9-3
Saab 9 3 (2002-2014 / MK 2) How to replace the cabin air filter on a Saab 9-3? Follow these steps: open the car door, pull up the engine bay release lever located at the bottom …
Where is the Fuel Filter Located on the Saab 93?
Where is the Fuel Filter Located on the Saab 93?
Saab 9 3 (2002-2014 / MK 2) In this video, you will see where the fuel filter is located on the Saab 9-3 and how to proceed if you need to replace it, a very simple and quick op…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos