Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the coolant of the Seat Marbella.

Model: Seat Marbella MK 1 - Years: 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
Part: Antifreeze coolant

Video tutorial

The information provided in this guide will show us how to replace the engine coolant or antifreeze of the Seat Marbella. First, lift the vehicle and start disconnecting the coolant hose located at the bottom, letting the fluid drain into a container; then bleed the system and finally top up with the new antifreeze liquid, unscrewing the filler cap and filling the reservoir until reaching the maximum level mark, as shown in the video.

Finally, start the engine and top up further if necessary.


Posted on 19 October 2025 by ScegliAuto


Related tutorials

Seat Marbella (1986-1998 / MK 1) In this tutorial, we can see how to replace the air filter in the Seat Marbella, an extremely simple and quick operation. First of all, make sure tha…
Seat Marbella (1986-1998 / MK 1) In this video, we see true DIY because we will learn how to use a recycled plastic bushing to repair the gear lever - in this case of a Seat Marbella…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos