Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the glow plugs of the Seat Alhambra 2.0 TDI

Model: Seat Alhambra MK 2 - Years 2010-2020
Part: Glow plugs

Today's instructions will show us the process of disassembling and replacing the glow plugs of the engine of the Seat Alhambra 2.0 TDI. First, we open the hood of the car and start removing the plastic cover of the glow plugs, unhooking the plastic clips; then we remove the rail pipes and disconnect the connectors of the glow plugs, as shown in the video. At this point, we use a socket wrench with an extension to unscrew and remove the four glow plugs, replacing them with the new original ones (screwing by hand and tightening gently with a wrench).

Posted on 14 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Handle on Seat Alhambra
Seat Alhambra (2000-2010 / MK 1) Let's look at replacing the handle on the Seat Alhambra. Open the door of the Seat Alhambra and locate the parts to disassemble. Unscrew the screw lo…
How to Replace the Front Headlight Bulb on a Seat Alhambra?
How to Replace the Front Headlight Bulb on a Seat Alhambra?
Seat Alhambra (2000-2010 / MK 1) To replace the front headlight bulb on a Seat Alhambra, lift the flap located inside the wheel arch corresponding to the bulb you wish to replace. By…
How do you remove the door panel of the Seat Alhambra?
How do you remove the door panel of the Seat Alhambra?
Seat Alhambra (2010-2020 / MK 2) It will be possible to remove the door panel of the Seat Alhambra by prying with an object to detach the molding at the top of the device: once this …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos