Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Fog Light

Model: Seat Altea MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fog lights

Video tutorial

To replace the front fog light, you need to remove the corresponding support grille by unscrewing the fixing screw located at the bottom left corner. Once the screw is removed, push the grille to the right and then pull it to the left to extract it from its housing.

At this point, unscrew the fixing screws of the fog light, disconnect the power plug, and proceed in reverse for the installation of the new one. After installation, perform a functionality check and, if necessary, adjust the beam orientation using the appropriate adjustment screw.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

How to Replace the Fog Light on a Seat Altea
How to Replace the Fog Light on a Seat Altea
Seat Altea (2004-2015 / MK 1) Before discovering how to correctly replace the fog light on the Seat Altea, it is important to take reference points for the position of the light s…
How to Replace the Fog Lights on Seat Cars
How to Replace the Fog Lights on Seat Cars
Seat Altea (2004-2015 / MK 1) Start the replacement operation by unscrewing the screw located to the left of the left front fog light. Use a star screwdriver for this. Once done, …
How to Fit the Front Headlight of a Seat Altea
How to Fit the Front Headlight of a Seat Altea
Seat Altea (2004-2015 / MK 1) Let's see how to fit the front headlight of a Seat Altea. Open the bonnet by pulling the bonnet release lever and secure it. Remove the front bumper …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos