Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Engine Oil Filter and Engine Oil on SEAT IBIZA 3 6L

Model: Seat Ibiza 6L - Years 2002-2009
Part: Engine oil

In this video tutorial, you can see how to replace the engine oil filter and engine oil on a SEAT IBIZA 3 6L 1.4 Hatchback. The first step is to purchase a new oil filter and fresh oil from an authorised dealer. Lift the bonnet and secure it with the appropriate prop, unscrew the oil filler cap, raise the car using a jack, and place safety stands under the vehicle (the vehicle must be positioned horizontally; if it is inclined, the drain plug must be at the lowest point). Position a container to collect the used oil under the oil drain hole. Use a 19mm socket wrench to unscrew the drain plug and wait for all the oil to drain into the container. Using a 30mm socket wrench, unscrew the oil filter and place the old filter in a container; immediately position the container under the filter drain hole to collect any escaping oil. Lubricate the seal with clean oil and screw on the new oil filter, tightening it with a torque wrench to 26 Nm. Screw the new oil plug in place and tighten it with a torque wrench to 27 Nm. Remove the container from under the vehicle and lower the vehicle to the ground. Using a funnel, top up with the new oil: the required oil quantity is 3.2 litres, check the level with the dipstick, and top up if necessary.

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Seat Ibiza (2008-2017 / 6P, 6J) Today's step-by-step instructions will allow us to change the engine oil and oil filter of the Seat Ibiza 1.2. First, let's lift the vehicle and star…
Seat Ibiza (2002-2009 / 6L) Replacing the engine oil and oil filter on a Seat Ibiza vehicle independently is a very simple operation. We begin the replacement by opening the hoo…
Seat Ibiza (2002-2009 / 6L) In this very simple video tutorial, learn how to remove and clean the oil pressure sensor of a Seat Ibiza or Volkswagen Polo up to 2009. First, open …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos