Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on a Seat Alhambra

Model: Seat Alhambra MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Service warning light

See other generations:
Video tutorial

After replacing the engine oil on the Seat Alhambra, the control system that alerts when to perform the operation must be reset. Sit in the driver's seat, press and hold the button next to the speedometer, located on the lower left, and press the "start" button to turn on the instrument cluster.

Rotate the button on the lower right next to the rev counter. Release both buttons, turn off and then turn on the instrument cluster again: the absence of the "service" message on the small display to the right will confirm that the reset was successful.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on the Seat Alhambra
Resetting the Service Light on the Seat Alhambra
Seat Alhambra (2010-2020 / MK 2) A message on the dashboard alerts us when it's time for a service on the Seat Alhambra. After completing all necessary operations, you must reset the…
How to reset the Service light on the Seat Alhambra?
How to reset the Service light on the Seat Alhambra?
Seat Alhambra (2000-2010 / MK 1) The procedure to reset the Service light on the Seat Alhambra involves holding down the 0.0/SET button located on the right side of the instrument cl…
How to reset the Service light on the Seat Alhambra?
How to reset the Service light on the Seat Alhambra?
Seat Alhambra (2000-2010 / MK 1) To reset the Service light on the Seat Alhambra, press and hold the button located on the central right side of the instrument panel while it is off.…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos