Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Airbag Light on Skoda Octavia

Model: Skoda Octavia 1U, MK 1 - Years 1996-2004
Part: Warning light – error code

To reset the airbag light on Skoda cars (the procedure is also valid for Audi and Volkswagen cars), first ensure that the diagnostic interface light is on the dashboard. Now disconnect the onboard computer from the vehicle's electronic control unit. This is done by unplugging the connection found under the driver's seat. At this point, remove the small plastic cover located in the centre of the dashboard (as shown in the images) and connect your external computer to use the vehicle's diagnostic software. When you open the diagnostic program, select the button in the top left (corresponding to "Select Control Module"). In the next screen, enter the number "15" in the empty field below, as indicated in the images. Now select the button "Fault Codes - 02" in the top left, and finally, select the button "Clear Codes - 05" in the next screen. Click on "Done - Go Back" and you're done. Turn off the computer, disconnect it from the car, and reverse the steps to return to the starting point and check that the "diagnostic interface" light goes off.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Skoda Octavia (2004-2012 / MK 2, 1Z) Today we will see the instructions that will allow us to reset the malfunction indicator light of the airbag in the Skoda Octavia; in this case, the …
Skoda Octavia (2012-2019 / MK 3, 5E) In this tutorial, you will learn how to disable the passenger airbag in the Skoda Octavia. This operation is very simple and quick, especially if you…
Skoda Octavia (2004-2012 / MK 2, 1Z) In this tutorial, you will learn how to reset the tyre warning light on a Skoda Octavia. This operation is very simple and quick, to be performed onl…

Other guides you may be interested in

    Frequently Asked Questions

    • Octavia 2012-2019 - What does the p171900 fault code on the Skoda Octavia mean? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos