Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Alternator from a Skoda Yeti

Model: Skoda Yeti MK 1 - Years 2009-2017
Part: Alternator

This operation requires good manual skills, as the alternator is mounted in a tight position under other components, which poses a risk of damaging parts. Before proceeding, disconnect the negative terminal of the battery. It is also necessary to have the workshop manual for your specific model/year/engine. Then disconnect the battery, lift the car, remove the engine cover, and locate the alternator, which on 1.2/1.4 TSI or 1.6/2.0 TDI engines is found low on the right side of the engine when viewed from the bonnet, near the gearbox. Drain the coolant, disconnect the hoses and connectors, and remove the auxiliary belt. Disconnect the electrical cables from the alternator (the thick cable connected to the battery and the clip connector for the voltage regulator). Unscrew the supports, noting the position of any spacers and bushes, and extract the alternator. Insert the new part without tightening the fixing bolts, reconnect the electrical cables (first the clip connector, then the thick cable), refit the auxiliary belt, reassemble all removed components, top up the coolant, and refit the engine cover. You can then reconnect the battery and check that the engine starts correctly.

Posted on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Skoda Yeti (2009-2017 / MK 1) If you own a 2012 Skoda Yeti and want to manually reset the service light independently, simply follow the steps outlined in this guide. First, inser…
Skoda Yeti (2009-2017 / MK 1) Let’s look at removing the door panel from a Skoda Yeti along with the associated cover pieces. Remove the plastics to access the securing screws. Ta…
Skoda Yeti (2009-2017 / MK 1) In this video, follow the main steps to remove and replace the radio antenna on a Skoda Yeti in simple steps. First, open the boot and detach the rea…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos