Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Steering Tie Rod of a Skoda Octavia

Model: Skoda Octavia 5E, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tie rods

See other generations:
Video tutorial

In this video, we will show the removal of the steering tie rod of a Skoda Octavia. Position your car on a column lift, raising it to a comfortable height for access.

Unscrew the front wheel bolts with a socket wrench and remove the wheel. Begin unscrewing the tie rod bolts with a socket wrench (as shown in the video).

Unscrew the bolts located under the tie rod end and the tie rod, then pull it away from the vehicle body. Fit the new steering end, then screw it in with all the attached bolts.

Finally, refit the wheel with the bolts.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

…
Skoda Octavia (2019-2026 / MK 4, NX) In this tutorial, you will learn how to replace the battery in the remote key for the Skoda Octavia, a very simple and quick operation. For this, you…
Skoda Octavia (2012-2019 / 5E, MK 3) In this video tutorial, you will see how to replace the battery of the remote control for the Skoda Octavia MK3, useful when it runs out over the yea…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos