Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper on Skoda Octavia

Model: Skoda Octavia 5E, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Front bumper

See other generations:
Video tutorial

Lift the bonnet and secure it. Unscrew the bolts that are now accessible and secure the bumper from above, as shown in the video, then do the same with the bolts underneath (there are a couple in the wheel arches, so move them just enough to access those bolts).

By following the procedure clearly shown in the video and unscrewing all the numerous fixing elements present, you will be able to remove the bumper from its position.

This operation is quite lengthy but not difficult. For the installation of the new bumper, simply reverse the procedure.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Skoda Octavia
How to Remove the Front Bumper of the Skoda Octavia
Skoda Octavia (2004-2012 / 1Z, MK 2) This guide provides the main instructions on how to remove the front bumper from the Skoda Octavia in simple steps. First, open the bonnet of your ca…
Replace Front Bumper on Skoda Octavia
Replace Front Bumper on Skoda Octavia
Skoda Octavia (2004-2012 / 1Z, MK 2) To replace the front bumper on a Skoda Octavia, start by lifting the bonnet. Remove the rivet-screws located at the top of the bumper. Once the top i…
Removing the Front Bumper on Skoda Octavia
Removing the Front Bumper on Skoda Octavia
Skoda Octavia (2004-2012 / 1Z, MK 2) Open the bonnet and insert the support rod. Using a Torx key, unscrew the two pins above the bumper in the engine bay. Then, unscrew all the screws l…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos