Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Remote Battery of the Skoda Fabia MK3

Model: Skoda Fabia Mark3, NJ - Years 2014-2021
Part: Key

In this video, you will see how to disassemble and replace the battery of the remote key for the Skoda Fabia third series, in simple steps. First, take the remote in hand and start by removing the plastic rear cover, prying it off from the sides; this will give you access to the battery compartment, as shown in the video. At this point, remove and replace the battery with a new one of the correct type (in this case, a CR 2025 3V); simply insert it the right way round and reassemble the remote by securing the rear cover!

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of a Skoda Fabia
How to Replace the Key Battery of a Skoda Fabia
Skoda Fabia (2014-2021 / Mark3, NJ) The first step in replacing the key battery of a Skoda Fabia is to insert a flathead screwdriver into the side where the ignition key usually rests. …
Replacement of the Skoda Fabia key remote battery
Replacement of the Skoda Fabia key remote battery
Skoda Fabia (2014-2021 / Mark3, NJ) Today's instructions will show us the process of disassembling and replacing the battery of the Skoda Fabia key remote. First, we take our remote and…
How to replace the battery of the Skoda Fabia key remote control
How to replace the battery of the Skoda Fabia key remote control
Skoda Fabia (2007-2014 / Mark2, 5J) Replacing the battery of the key remote only takes a few minutes; let's follow the procedure on the Skoda Fabia key. First, take the remote in hand a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos